Investigations on grinding process of woven ceramic matrix composite based on reinforced fiber orientations

Fiber orientations play the decisive role in grinding process of woven ceramic matrix composites, but the influence of woven fibers in grinding process is not clear. This paper studies the surface quality and grinding force by comparing different woven surfaces. Through a series of experiments in optimized sampling conditions, we analyze characteristics of the material surface topography height, wave distribution and surface support properties in details. And we find some outstanding characteristics of the surface microstructure. We also study the influence of grinding processing parameters on surface microstructure. The results show that machining surface which contains more parallel fibers is rougher and more keenness than gauss surface. Grinding wheel speed and depth of cut have great influence on surface topography and surface support properties. And it is discovered that grinding forces are also highly dependent on fiber orientations. The mechanism of the grinding phenomena is also analyzed in this paper according to knowledge of fracture mechanics and mechanical damage phenomenology. The research obtained will be an important technical support on improving the processing quality of woven ceramic matrix composites.     

Iron-binding peptides from whey protein hydrolysates: Evaluation,isolation and sequencing by LC–MS/MS

Iron–peptide complexes have been considered a promising source of more bioavailable iron, with reduced side effects as compared to iron salts. Whey protein isolate (WPI) hydrolyzed by alcalase, pancreatin or flavourzyme was ultrafiltered (cut off 5 kDa) and their fractions – retentates and filtrates – were evaluated for iron-binding capacity. The Fe–hydrolysate complexation reaction resulted in a dramatic increase in iron solubility at pH 7.0, from 0% to almost 100%. This result was obtained regardless of the molecular mass profile or the enzyme used to obtain the samples. Fractions from hydrolysate obtained with pancreatin (HP) were chosen to continue the study. The complexes formed with both fractions from HP were stable under simulated gastric digestion (50.8–89.4%). To identify the peptides with iron-binding capacity, the HP fractions were isolated by IMAC-Fe^3 +, and the retentate showed higher relative concentrations of iron-binding peptides than the filtrate. Iron-binding peptide sequencing, accomplished by LC–MS/MS, showed Glu and/or Asp in all the sequences, and their carboxylic groups were amongst the main iron-binding sites. WPI hydrolysis with pancreatin yields peptides that can form iron complexes with the potential to increase iron bioavailability and reduce its pro-oxidant effect.     

食物成瘾的研究进展及启示

食物成瘾是一种复杂的慢性疾病，导致人们在日常生活中对某种食物产生过度依赖与过度进食等相关行为特征，近年来已被认为是影响欧美发达国家肥胖症、暴食症、糖尿病等发病率持续升高的关键原因，引起学术界的极大关注，成为研究热点。本文主要介绍食物成瘾的概念、诊断标准，综述了食物成瘾的病理机制、影响因素和应对措施等方面的研究进展，并探讨食物成瘾对我国食品界的启示，为预防食物成瘾，保障公众健康提供有益借鉴。     

A note on using the Hodrick–Prescott filter in electricity markets

Recently, Nowotarski et al. (2013) have found that wavelet-based models for the long-term seasonal component (LTSC) are not only better in extracting the LTSC from a series of spot electricity prices but also significantly more accurate in terms of forecasting these prices up to a year ahead than the commonly used monthly dummies and sine-based models. However, a clear disadvantage of the wavelet-based approach is the increased complexity of the technique, as compared to the other two classes of LTSC models, and the resulting need for dedicated numerical software, which may not be readily available to practitioners in their work environments. To facilitate this problem, we propose here a much simpler, yet equally powerful method for identifying the LTSC in electricity spot price series. It makes use of the Hodrick–Prescott (HP) filter, a widely-recognized tool in macroeconomics.     

Use of conditioning time to investigate the mechanisms of interactions of selected fatty acids on hematite Part II laboratory investigations

It is the aim of this paper to examine the effects of conditioning time on the flotation of hematite using three technical grade fatty acid reagents as providing additional evidence on their mechanism of interaction with the hematite surface. Various mechanisms have been postulated as occurring as conditioning time is increased. Both physical (e.g. conditioning time and power input) and chemical (nature, dispersion and solubility of the adsorbing species) contribute to the mechanisms of attachment of collector. In this paper, the mechanism of attachment of oleate to hematite can be readily explained by chemisorption, but the mechanism of attachment of lauric acid appears to be physical adsorption at neutral pH. The flotation of hematite with a mixture of tallow-type fatty acids (palmitic, stearic and oleic acids) is very sensitive to conditioning time, and suggests that, even though flotation is very effective at short conditioning times, it is very susceptible to the presence of fines and their associated high surface areas. It is therefore obvious that both the physical and chemical conditions contribute to the mechanisms of adsorption of fatty acids on iron-containing oxide minerals and must be understood in order to optimise the flotation of these minerals in an industrial situation.     

A study on flowshop scheduling problem combining Taguchi experimental design and genetic algorithm

As genetic algorithm parameters vary depending on different problem types when applying genetic algorithm to reach global optimum, appropriate design value selection has significant impact on the efficiency of genetic algorithm. However, most users adjust parameters manually based on the reference values of previous literature. Such trial-and-error method is time-consuming, ineffective, and often it could not locate the optimal combination. Therefore, in flowshop scheduling problems, this research anticipates to complete optimal parameter combination design in genetic algorithm using Taguchi experimental design. According to the research results, different ways of producing initial solution have significant influence on this research topic. Consequently, confirmation experiment is conducted using the optimal parameter combination obtained from the research results. It is found that the predicted value of signal-to-noise ratio (S/N ratio) and its actual value exists deviation of 0.238%, indicating repetitiveness and robustness of the obtained parameter combination. Hence, this research method can effectively reduce time spent on parameter design using genetic algorithm and increase efficiency of algorithm.     

Synthesis and properties of cinnamic acid series organic UV ray absorbents–interleaved layered double hydroxides

Organic ultraviolet (UV) ray absorbents, cinnamic acid (CA) and p-methoxycinnamic acid (PMOCA) were intercalated into Zn₂Al layered double hydroxides (Zn₂Al-LDHs) by co-precipitation reaction. The organic–inorganic nanocomposites, Zn₂Al-LDH/CA and Zn₂Al-LDH/PMOCA were obtained. The samples showed excellent UV ray absorption ability and their catalytic activity for the air oxidation of castor oil greatly decreased when the organic UV ray absorbents were intercalated in the layers of the Zn₂Al-LDHs. The studies suggested that Zn₂Al-LDH/organic UV absorbent nanocomposites might be used as safe sunscreen materials.     

Behaviors of concrete-filled steel tubular members subjected to combined loading

The present study is an investigation on the behaviors of concrete-filled thin-walled steel tubular members subjected to combined loading, such as compression and torsion, bending and torsion, compression, bending and torsion. ABAQUS software is used in this paper for the finite element analysis (FEA). A comparison of results calculated using this modeling shows generally good agreement with test results. The FEA modeling is then used to investigate the influence of important parameters that determine the ultimate strength of the composite members under combined loading, such as compression and torsion, bending and torsion, compression, bending and torsion. The parametric studies provide information for the development of formulae for calculating the ultimate strength of the composite members subjected to combined loading.     

机床工具产品色彩造型初探

本文针对我国机床工具产品色彩设计的现状,结合具体实例,对色彩造型的实质做了初步的探讨。分析了色彩造型和色彩装饰两种设计观和实践效果;以色彩与形状关系及作用的论证为引,论述色彩造型的三大功能作用。并提出可供机床工具产品色彩设计参考的具体设计方法和手段。